A Beginners Guide To Wood Finishing – Woodworking Tips

When it comes time to finish your project you need to know that for wood treatments it is either stain, paints or finish. They are each providing a different outcome. To tint the wood you would use wood stains. Paints sit on the wood and protect it. Some finishes are pretty much paint without any color added to it. They are the ones that give that clear protection.

Probably one of the most well known finishes is varnish. It?s a great finish because the more layers you use the stronger the finish. The major problem with varnish is it dries slowly which increases the chance for dust to get into the finish. If possible, try to do your finishing work in an area where there is the least amount of dust.

A mixture of resins and synthetics boiled together is what makes varnish. If you are using polyurethane?s then you are simply using a varnish that has had a polyurethane resin added to it. When you are using a varnish that contains a higher quantity of oil, it makes the product more flexible and this is known as Spar varnish, which makes it perfect for outdoor use because of it flexing properties.

If you are going to use varnish as your finishing product then you need to know how to apply it properly. Working in a dust free room is a priority. Then using a tack cloth wipe down your project as it must be perfectly clean. Put some of your varnish into a container that you can work out of .That way if it becomes contaminated with dust you can just discard that amount. Apply the varnish using long steady strokes with a brush working in the grain direction. Tip off your brush strokes. Wed sand in between coats with fine sandpaper.

There is also wiping varnish but read the labels carefully before using this product to be sure that it is varnish and not tung oil.

Then there are oil and varnish blends. They work similar to an oil finish but have a bit more protection to them but they are not for building layers.

Shellac is a natural resin but not is as durable as the others are. It?s not good for items such as kitchen counter or cabinets for example. It is a fast drying product though and you can get it in various colors.

Lacquer is usually applied with a spray gun but the fumes can be dangerous and the dry dust is explosive.

There are some really good what are labeled as water based finishes but they all have a certain amount of solvent in them. Their two weaknesses is they show brush marks and they bubble when you are applying them so use a synthetic brush for this.

Proper sanding between coats of your finish is one of your most important steps. Be sure to use fine sandpaper. The sanding removes bumps and uneven spots. Especially made sandpaper for wet sanding is ideal. Really, take the time to research the various finishes you are going to use to get the best application and intended use from them.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

July 11 2009 | Woodworking | No Comments »

Building A Tool Collection For Your Workshop – Woodworking

Do you really know which woodworking tools and equipment is essential for your skills? Not only do you have to decide on what tools to buy but also how much you want to budget for them as well as their quality.

Some tool shoppers feel they just have to buy the highest quality tool on the market while feel they really want to keep it low budget. If you are a weekend woodworker than the low budget, tools should work just fine for you. If you are a seasoned woodworker starting to set up your own shop and know you are, going to be at it consistently then you may want the higher priced tools which means better quality.

Number one on your list should be a drill and a corded one is less expensive. Be sure it has a screwdriver attachment. Next, you want to get a circular saw for your trimming and basic cuts? Then you will need a sander. Preferably a finishing sander. It?s perfect for rounding off some of your pieces and it gives a nice finish to your projects. It only uses a ? of a piece of sandpaper, which is quite economical

A jigsaw is another valuable tool. It?s used for your rough outline work and for cutting curves. It?s not a tool that you will want to be without. Then a table saw should be on your ?must buy? list as well. When you go to buy this one spend a bit more money and get a good quality one. You will be using this tool on a regular basis. You need one that is going to have a powerful motor. The lesser quality ones with the smaller motors tend to stall out.

The same principal should apply for your router so make sure you buy a good one. You want to be sure you are going to get precision work. The router has multiple uses like cutting the profiles into the wood and is also used to cut molding and special cuts as well. You will need to determine if you want to buy a plunged or fixed version. The plunged are a bit more expensive. You have to set how deep your cut is going to be before turning on the router if you are using a fixed router.

Then you eventually are going to need a band saw and a compound miter saw. You will need a lathe but it?s the quality of your turning tools that will be important here. If you like to finish your projects quickly then purchase a biscuit joiner.

Finally, you are going to want a belt sander as well as a drill press.

Once you have purchased all of the wonderful tools there aren?t going to be too many projects that you can?t handle. You will now have a very well equipped workroom to give you many hours of enjoyment and quality workmanship.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

July 10 2009 | Woodworking | No Comments »