The Benefits Of Compound Mitre Saws

Compound mitre saws are good for great extremely definite compound cuts at the end of a chunk of wood. You'll find them typically used to chop long stock, to carve out picture frame molding as well as crown molding (angled cuts in two planes) and also when cutting out lots of boards of the same length from the piece.

They come with an electric motor that is mounted on a swing arm "its pivots right and left to create angled cuts, otherwise called mitre cuts. Compound mitre saws are quick and highly correct "you get the measurements exactly as you had marked them.

If you want to get rather more accurate and make bevelled mitre cuts, all that you need to do is lean your mitre saw. The motor will pivot right and left but also toward the tilt.

You'll worry about their pricing "they are more expensive than regular mitre saws, but when you consider that they make compound cuts at once, its actually money well spent.

They've just one component that may be a bit discouraging though "the motor will not slide and therefore you can't pull the saw through a wood piece being cut. You've got to set the piece on a table and then set the already spinning saw blade down through it. See also the essay on a cord-free circular saw.

To overcome this difficulty, you can think about getting a sliding compound mitre saw, which can sometimes be viewed as an upgrade of the regular compound miter saw. As the name says, after you lower the blade onto the wood on the table, the blade itself can be dropped forward. It will allow you to chop way wider pieces. If you mix this with its ability to tilt, it means that you can do really complex cuts on big pieces of wood.

How does one choose a good compound mitre saw?

1. The 1st and most crucial thing is the blade size, and this of course will be determined by the size of wood pieces you will be working. It's possible to get blades 8, 10 and 12 inches, and the bigger the blade diameter, the longer the cuts that you can make. That means, as an example, if think you will be slicing long planks, you must go for the 12 in..
2. Also glance at the material the blade is made of because this can tell you what the saw is supposed to be utilised for. Steel blades are inexpensive and will do for softwood. They leaden quickly on hardwood though. There are compound miter saws made of high speed steel blades which is harder and takes a longer time to dull. Carbide tipped blades will stay sharpened for a long time, but they also are more expensive. If you're going to work hardwood, its best to speculate in a carbide tipped one "you will save a lot of trouble.
3. Check to determine if it has electric brakes "they will stop the saw blade quicker than if you just put off the power supply. This is a favored safety feature that you must insist on.
4. You need to get a compound mitre saw blade which has retracting blade covers so that you can guard the blade. They have to be retracting in order that they will not be in your way as you're employed.
5. The saw should also come with table extensions that you can install when working larger pieces of wood.
6. Compound mitre saws will typically have pre-set points for explicit angles that are called positive stops. The more, the better for you as the less time you will spend setting up.
7. Some will feature a dust bag to collect sawdust in.

Compound mitre saws can be pretty heavy, so if you plan to take yours from site to site, that is another consideration.

Andy Norris has spent his pro career in DIY. He write about the tools of the trade which he finds most helpful. A hardwood flooring nailer works really well in conjuction with a compound mitre saw.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Tags: , , , , , , ,

September 19 2011 | Miter Saws | No Comments »

Just What is a Miter Saw and Why Should You Own One?

In today's woodworking market, miter saws are one of the hottest items. In fact, the thing to own seems to be a high-end sliding compound miter saw. Miter saws are relatively small, lightweight and inexpensive but rugged enough to withstand daily use. They are essentially a circular saw mounted on a pivoting arm, supported by a metal base.

The article that follows provides detailed background about miter saws, their characteristics and versatility. You'll probably conclude that, while compound miter saws are somewhat more expensive than regular miter saws, the ability to making compound cuts in one pass is worth the added price.

Before getting to the substance of the article, please note that if you're in the market for a miter saw, there is a large selection of miter saws offered for sale at very advantageous prices through the eBay auction listings which you'll find by clicking on the foregoing link.

A Quick Explanation of Miter Saws

There many different saws on the market today. Knowing what they should be used for is key to creating great projects and using them safely. A saw that you want to be familiar with is the miter saw.

Long ago miter saws used to have a blade attached to a box that would create 90 and 45 degree angles. They were used to cut through frame, crown or chair molding or the baseboard moldings of exterior corners. There are some people that prefer these old fashion miter saws. As long as they are in good working condition and are safe, the old fashion type is fine to use.

Miter saws are basic tools that have a ton of power. Power versions will produce a clean cut that no hand saw could ever hope to make. Even the best hand saw will leave the cut a little bit raggedy. Using one of these newer, powered saws also helps get through the job in less time. Now that power tools are not very expensive and the price difference between hand saws and power ones is small, you can get powered tools for rather low amounts.

If you are looking for upgraded saws that allow you to complete more projects, you have to turn to the power ones. Miter and radial saws let users change the degree of the cut relative to the fence that helps to send the wood by an individual degree. Power miter saws have standard stops at 15, 30, 45 and 90 degrees. When trying to achieve perfect 45 degree cuts in opposite directions, firmly anchor the wood against a fence at a 45 degree angle. Do the same with the other piece of wood to create mitered corner to frames or window moldings.

Powered saws give users a serious edge when they are building. In addition to picture frames and crown molding, miter saws can also be used to create table tops, counters and other furniture. All of this and more can be done with power compound miter saws.

These saws are not just used for creating cute picture frames. There are plenty of neat things that miter saws can help sculpt into beautiful items. Elegant table tops, Near perfect counters and fashionable furniture can all be the product of miter saws. The saw that is responsible for all of these feats it called the compound miter saw. Compound miter saws allows users to make bevelled edges turn sharp corners into softer edges. With some sanding the cuts that compound miter saws make can be turned into neat, smooth edges.

The radial arm saw can also be used to make nicer edges. When embarking on cabinetry, use a panel saw.

Focusing on latest news in compound sliding miter saw, the reviewer published for the most part for http://www.insidewoodworking.com . You might see his writings on power compound miter saw and compound sliding miter saw at http://www.insidewoodworking.com .

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Tags: , , ,

May 09 2008 | Miter Saws | 2 Comments »