Neither is it easy nor totally impossible as some people would have us believe, for dry walling your home. For dry walling you have to follow a few simple steps. You will need equipment like plaster, patches, paint, hammer, joint putty, scraper, sandpaper, Tray, putty trial, thinner and many other tools to complete the work. It also depends on the size of the area about the exact kind of tools and materials necessary.
Sandpaper will be necessary. Once you start the drywalling process you will need to remove all lumps by giving the walls a thorough sanding until clear white is visible. Use a cloth to complete the procedure by cleaning down the wall by removing any sand particles.
If the wall has holes in it, plaster will get in. So fill in the holes with the scraper and putty trial by applying the joint putty and patch where necessary. When, a second coat of plaster is necessary, repeat the course of action until the hole is filled and scraped down to fineness.
Do not start to drywall until you have sand down the area, smoothed out the surface, and washed the wall, removing any dust particles from the wall. Do make sure that the area is dry, before you sandpaper the same. Follow the drywall method by following the systematic steps shown to you in the kit provided, till you achieve a clear smooth area.
After improving the wall by dry walling, paint it. Choosing the correct brushes and paint suited to the job will help you achieve the best effect. Before you shift around your furniture at home paint the base line area. Let the paint dry and touch up by re-arranging the, curtains and furnisher and other home items.
Dry walling is more time consuming than being difficult.
At times you can get make do with repairs rather than go for a big change. Since the walls are layered, a bit of a plaster and other tools and materials could spruce up the area. But if you have rotted area, you may want to think about other options; else you could hire an expert to get the repair done.
In case you have areas in your home which indicate wear and tear, taking care of the problem immediately can save you many problems later on. Usually a repair work is less troublesome than entire improvements, thus repairs almost always are a cheaper option.
Soon after the spackle is applied, use your sandpaper sand on the area. Use your scraper to remove or clear up the area if you notice any peeling, paint or loose plaster. Once the spackle starts drying and is sanded add a second coating to cover the entire hole. Now sand and prime the patched part. Now, you are ready to paint.
Wasnt that easy?
Tags:
do it yourself,
dry walling,
drywall
Related posts
September 30 2008 | Home Improvement | No Comments »
Reciprocating saws are not designed to be used by the feint of heart. They are a powerful and rugged tool meant to be used in construction tasks that require heavy duty cutting. For the weekend do-it-yourself enthusiast, the more robust construction models are not necessary in most cases. However, there are a number of lighter models on the market which can satisfy most requirements that may arise around the house. They are more affordable and easier to use.
In the following article, you’ll gain an understanding of the reciprocating saw, it’s used and the types available, along with some tips that can help you in deciding what tool will be most appropriate for your situation.
Before getting to the substance of the article, please note that if you’re in the market for a reciprocating saw, there is a large selection of reciprocating saws offered for sale at very advantageous prices through the eBay auction listings which you’ll find by clicking on the foregoing link.
Reciprocating Saws - The Jig Saws Mean Big Brother
The reciprocating saw is an adaptation of the saber saw, or jig saw, for heavy duty work such as construction. In this article I’ll cover the types available as well as blade types and their uses.
Reciprocating saws range widely in power, speed, and features, from less powerful portable, to high-power, high-speed, corded models. Modern reciprocating saws almost all have variable speed, using a trigger or preset using a dial. Another feature that has become important to the way these saws are used is the inclusion of an orbital action. The action consists of oscillating the traversed reciprocation in up and down fashion causing the tip of the blade to move in an oval pattern, up and down as well as back and forth. This feature is primarily for wood, allowing quick cuts.
The blades for these saws are range in length from 2 ½ to 12 inches, and are generally heavier than saber and jig saw blades. They range in purpose from cutting metal and wood as well as manner of materials in between.
Blade Types
Course Tooth - Typically used for cutting green wood.
Hack Saw - Used to cut metal, typically up to 1/8 inch in thickness.
Knife - This blade has the greatest range of uses. It cuts leather, rubber, cloth, linoleum, and many more similar materials.
Fine-tooth - When a smooth cut is need for wood, plastic, or hardboard this is the one for the job.
In many models, blades may be mounted to cut up, down, or horizontally, and flush with an adjoining surface. In structural work and remodeling, long blades are sometimes used to cut right through a wall, after of course making sure wire or plumbing won’t be damaged. Blades for such use can cut right through any nails they encounter. Blades manufactured specifically for cutting heavier metal, such as pipe or bar stock, need to be lubricated regularly with light oil.
These saws today almost always come with variable speed control. Speeds range from around 2300 strokes per minute down to a few hundred (for cutting steel and some plastics).
Picking the right saw for your own use really depends on the type of job(s) you intend to accomplish. A larger, more robust model is probably overkill for most around the home projects and not to mention the price for these puts them out of reach of most budgets. The smaller, lightweight, more affordable versions on the market today offer the typical handyman more then enough versatility to handle any “honey-do” list.
There you have it. Reciprocating saws are not for everyday use in most cases, but having one in your tool box is a smart decision for the avid do-it-yourselfer. Just remember to choose the right for your needs, and above use it and any power tool in a safe and controlled manner.
Chuck Lunsford is the Internet Manager for Mytoolplace.com. He offers advice on how to select and use the right reciprocating saw for the job. Visit our website and learn more about saving money on brand name cordless tools.
Tags:
diy,
do it yourself,
power saw,
power saw safety,
reciprocating saw
Related posts
May 09 2008 | Reciprocating Saws | 1 Comment »